Blustream MFP112 / MFP72 Control4 Driver

Overview

The Blustream MFP112 is a multi-format presentation switcher within-built video scaling, audio embedding, de-embedding, EDID management and HDBaseT™ input and output. The MFP112 works in 2 modes, first as a 11 input dual output switcher, alternatively each output can work independently with HDMI output 1 routing the 1x HDBaseT™ + 4x HDMI inputs only and output 2 switching all 11 video + audio inputs.

The Blustream MFP72 is a multi-format presentation switcher with in-built video scaling, audio embedding / de-embedding, and advanced EDID management. The MFP72 works in 2 modes, first as a 7 input dual output switcher (7:1x2), alternatively each output can work independently with Output 1 routing the 4x HDMI inputs only (4:1 up to 4K) and Output 2 switching all 7 video/audio inputs (7:1 up to 1080p). 

mfp112_front[1].jpg

The FREE driver developed by Chowmain will integrate the MFP112 and MFP72 series of Blustream devices via IP or RS232

Driver Features

  • Full two way feedback.
  • Full matrix switching
  • Commands
    • VGA Input Audio Adjust Picture Position
    • Set Output to Splitter Mode
    • Set Output to Matrix Mode
    • Set Scaler Audio Input to follow port selection
    • Set Scaler Audio Input to follow L/R Signal
    • Set Scaler Output Aspect Ratio
    • Set Output Zoom
    • Set Scaler Signal Overscan
    • Set Scaler Resolution
    • Info OSD
    • Set Scaler Bypass
    • Set Scaler Audio VOlume
    • Copy EDID from output to input
    • Set Input EDID to default EDID

FAQ

What hardware will this work on?

This driver will work for the following models.  It may also work with future models.

  • MFP112
  • MFP72

How much does this driver cost?

This driver is sponsored by Blustream and is FREE of charge

Who do i contact for driver support?

Please email support@blustream.com.au for technical support queries.

Find out more about the Blustream Multi Format Presentation Switchers

Download Driver

return to products page